Food and beverage packaging

Food and beverage cap feeders for bottle lines.

Automatic cap supply and presentation for food, drink and liquid packaging lines using screw caps and common closures.

Need the feeder to match your cap and capper?

Send cap samples, photos, target output and the downstream capping machine details. The quickest shortlist starts with real parts, not a generic speed figure.

Send cap details

Specification focus

Food and beverage lines need consistent cap supply and straightforward operation.

Food and beverage capping lines often depend on reliable screw cap feeding, clean operation and easy operator loading. The feeder needs to support the capper without frequent jams or missed caps.

A system may include a hopper, elevator, sorter, bowl feeder or cap chute depending on the closure and machine. Changeover and cleaning access should be considered when the line runs multiple products.

The correct route is based on cap samples, target output, bottle format and the available space around the conveyor.

Steady cap supplyKeep the capper fed during continuous production runs.

Operator-friendly loadingUse bulk storage and clear access where practical.

Format changeoverPlan around cap size changes and bottle formats.

Selection table

Key checks before specifying the feeder.

Check	Why it affects the design	What to send
Line speed	Output target affects feeder size and capacity.	Send bottles per minute or hour.
Cap type	Screw caps and closures need different routes.	Send cap samples and bottle neck details.
Access and cleaning	Food and drink lines may need easy access.	Send hygiene and access requirements.

Related routes

Continue with the nearest cap feeder route.

These supporting pages help match the closure, capping machine and line layout to the right handling method.

IndustriesIndustry-specific cap feeding routes. Screw cap feedersFeed threaded plastic caps into capping lines. Hopper cap feedersBulk cap hoppers and elevator feed routes. Request a quoteSend cap samples and line details for advice.

FAQs

Questions about food and beverage cap feeders.

Which food and beverage caps can be fed?

Many screw caps and closures can be fed automatically, subject to sample and line checks.

Can the feeder be cleaned?

Access and cleaning requirements should be specified before design.

Can it handle different bottle sizes?

The feeder is mainly cap-focused, but bottle format affects capping and handover stability.