Tamper evident cap feeders

Tamper evident cap feeders for banded closures.

Feed caps with tamper-evident bands while protecting orientation, skirt behaviour and capper handover.

Need the feeder to match your cap and capper?

Send cap samples, photos, target output and the downstream capping machine details. The quickest shortlist starts with real parts, not a generic speed figure.

Send cap details

Specification focus

Tamper evident cap feeders for banded closures

Tamper-evident caps can behave differently from plain screw caps because the band, bridges and skirt depth influence how the cap sits in the bowl, elevator or chute.

The feeder route should avoid damaging the cap and should deliver the closure in the correct orientation for the capper.

Band design and cap material can affect sorting, so final production samples are important.

Band geometryCheck band depth, bridges and internal features.

Cap damage riskAvoid handling routes that mark or distort the closure.

Capping torque routeConfirm how the capper applies and tightens the closure.

Selection table

Key checks before choosing the route.

Use these checks to decide whether the project needs a bowl feeder, elevator, sorter, chute, presenter or retrofit route.

Check	Why it affects the design	What to send
Bowl feeder	Useful for orientation where the cap geometry allows sorting.	Send cap samples with final tamper band.
Elevator route	Useful for bulk storage with controlled feed to sorting.	Send output target.
Chute handover	Critical to prevent cap tilt before tightening.	Send capper inlet photos.

Related routes

Continue with the nearest cap feeder route.

These supporting pages help match the closure, capping machine and line layout to the right handling method.

Screw Cap FeedersRelated advice for this cap feeding route.Plastic Cap FeedersRelated advice for this cap feeding route.Bottle Cap FeedersRelated advice for this cap feeding route.TroubleshootingResolve jams, starvation and orientation faults.Automatic cap feedersBulk storage, sorting and cap delivery for capping machinery.Vibratory bowl feedersSample-led bowl tooling for caps and components.

FAQs

Questions about tamper evident cap feeders.

Can tamper evident caps be bowl fed?

Many can, but the band and cap geometry must be checked with real samples.

Can the feeder damage tamper bands?

A poor handling route can mark or stress caps, so samples and correct tooling matter.

What details are needed?

Send final caps, bottle details, capper type, output target and required orientation.