Cap feeder machines

Cap feeder machines for automatic bottle capping.

Match the feeder machine to your cap style, capper inlet and required caps-per-minute output.

Need the feeder to match your cap and capper?

Send cap samples, photos, target output and the downstream capping machine details. The quickest shortlist starts with real parts, not a generic speed figure.

Send cap details

Specification focus

Cap feeder machines for automatic bottle capping

A cap feeder machine is normally specified after the closure has been checked for orientation behaviour. Small differences in ribs, tamper bands, tubes or cap weight can change how a cap moves through a bowl, track or chute.

Cap Feeders UK focuses on practical feeder routes for production lines that need controlled cap delivery. This can include a hopper, elevator, vibratory bowl, sorter, chute, level sensors and connection to the capping machine.

The aim is stable presentation at the capper, not simply a high nominal feed speed.

Cap rangeCheck whether one machine can handle all closures or needs change parts.

Speed targetDefine normal running speed and maximum surge demand.

Operator loadingChoose hopper size and loading height around real production use.

Selection table

Key checks before choosing the route.

Use these checks to decide whether the project needs a bowl feeder, elevator, sorter, chute, presenter or retrofit route.

Check	Why it affects the design	What to send
Single cap format	Most suitable for dedicated bowl tooling and stable output.	Send final cap samples.
Multiple similar caps	May be possible with changeover settings or parts.	Send the full cap range.
Mixed closure family	May need separate tooling or a different presentation route.	Send samples of each cap, pump or trigger.

Related routes

Continue with the nearest cap feeder route.

These supporting pages help match the closure, capping machine and line layout to the right handling method.

Automatic Cap Feeding MachinesRelated advice for this cap feeding route.Cap Feeder SystemsRelated advice for this cap feeding route.Cap Feeder RetrofitRelated advice for this cap feeding route.Cap Feeder Change PartsRelated advice for this cap feeding route.Automatic cap feedersBulk storage, sorting and cap delivery for capping machinery.Vibratory bowl feedersSample-led bowl tooling for caps and components.

FAQs

Questions about cap feeder machines.

Can one cap feeder machine handle different cap sizes?

Sometimes, but the usable range depends on cap geometry and the required orientation accuracy.

Can a cap feeder machine be retrofitted?

Often yes if there is space, a suitable cap handover point and a control interface to the existing capping machine.

Is cap feeder speed the only selection factor?

No. Orientation reliability, chute behaviour, capper handover and changeover are just as important.